| You are at: PSU > LEPA > LEPA N Series > 500W | |
| Model LEPA N500-SA | |

![]() |
High efficiency 5Vsb circuit helps system to meet EU ErP Lot 6 2010 standby low power consumption requirements |
![]() |
12cm fan with thermal programmed speed controller providing silent cooling performance |
![]() |
PCI-E connector supplied supporting extreme graphic cards |
![]() |
Protected by Over Power, Over Voltage, Over Current, Short-Circuit, and Brown Out protections circuits |
![]() |
CPU 12V connector rail with >18A output to support next generation ﹥6 cores processor structure |
![]() |
Extended CPU connector cable to 60cm facilitates installation with bottom-mounted-PSU chassis |
![]() |
SATA power connector with 3.3V rail to support new generation SSD |
![]() |
Active PFC switching circuit improves Power Factor value up to 0.99, reducing AC line reactive power loss to minimum level. (N400-SA-EU, N500-SA-EU, N600-SA only). |
![]() |
2 year warrenty |
| Model Number: N500-SA | |||||||||
| AC Input Voltage | 115 - 230V 47-63Hz | ||||||||
| AC Input Current | 8/5A | ||||||||
| DC Output | +3.3V | 25A | 130W | ||||||
| +5V | 20A | ||||||||
| +12V | 34A | 408W | |||||||
| -12V | 0.8A | 9.6W | |||||||
| +5Vsb | 3.0A | 15W | |||||||
![]() |


![]() |