ECOMASTER - ENERMAX - CPU Cooler - Down Flow - ETD-T60-TB - Enter the World of Efficient Cooling

- Patented VGF (Vortex generator flow) technology to greatly increase air convection.

- Unique air path creating high VEF (Vacuum Effect) to optimize the airflow.

Side flow type with six Ø6mm high performance heat pipes.

Heat pipes crossed from two sides of the heat sink for the best thermal conduction

Soldering Technology

Each heat pipes soldered to the fins and bases for a definite contact in producing high efficiency rate of heat transfer

CPU Cooler Soldering Technology

Nickel-plated heat sink to reduce oxidation effect and maintain the top performance.

Nickel-plated heat pipes

Extremely quiet Twister Bearing Vegas Duo fan with PWM function to adjust the power efficiently.

Down flow type with patented circular type LED lights with 11 switchable modes and fancy fan cover

Solid metal springs attached.

Anti-vibration rubbers prevent fan vibration and absorb noise.

Universal bracket for Intel® 775/1155/1156/1366 and AMD® AM2/AM2+/AM3/AM3+.

High thermal conductivity grease to ensure the best thermal conduction between CPU and the heat sink.

Model Number: ETD-T60-TB
Compatible Socket	Intel® LGA 775/1155/1156/1366, AMD® AM2/AM2+/AM3/AM3+
Overall Dimension	130(L) x 130(W) x 115(H)mm
Heat Sink Dimension	130(L) x 130(W) x 85(H)mm
Weight	550 (excluding fan and mounting brackets)
Heat Pipe	6 x Ø6mm
Material	Nickel-plated copper heat pipes, aluminum fins
Thermal Resistance	0.12 °C/W
Thermal Grease	Dow Corning® TC-5121
Fan Model	T.B.Silence PWM 120mm fan
Fan Dimension	120 x 120 x 25 mm
Fan Speed	800 ~ 1800 RPM
Air Flow	37.57 ~ 86.70CFM 63.83 ~ 147.3m3/h
LED	N/A
Static Pressure	0.72 ~ 2.41mmH2O
Rated Voltage	12V
Bearing Type	Twister Bearing
MTBF	100,000 hours
Noise	10 ~ 21dBA
Connector	4 pin PWM connector
Accessory	Metal Spring

Larger version of one of the smaller images above

	If you are looking to upgrade the cooling potential of your small form factor computer, the Enermax ETD-T60-VD is definitely a low profile CPU cooler worthy of recommendation. http://www.eteknix.com/reviews/cooling/enermax-etd-t60-vd-low-profile-cpu-cooler-review/
	Conclusion: Definitely a solid heatsink, it can even hold its own compared to other tower-style CPU coolers. If you have a small case, this is definitely a HSF worth considering. If your motherboard chipset heatsinks tend to get hot, this cooler will pass cooler air over all of your components. Just make sure you have adequate intake and exhaust fans to keep this flow going. This cooler is priced a little higher than the competition, e.g. the Cooler Master GeminII S524, but the greater CFM and lower dBa are worth it in my opinion. 4.5/5 stars from me! http://www.overclock.net/products/enermax-etd-t60-t-b-silence/reviews
	Bringing all of these features together and topping it off, it is a performer in the absolute sense of the word. It bests many large tower coolers, beaten only by a couple of the best tower coolers (one of which uses two fans) we've ever tested, and stands as the king of top flow coolers we have tested thus far! http://www.tech-kings.net/home/index.php?option=com_content&view=article&id=173%3Aenermax-etb-t60-tb-cpu-cooler-